Need center to center measurement for Tool 2079

[Huw Powell]

> What setting would you set the 100 ft torque wrench to get 332 ft-lbs 
> at the crank bolt?
> 332 ft-lbs would be the setting.

Or hang 166 lbs of body weight on a 45 degree four foot pipe.  Not too 
hard in practice.  Fussing with the 2079 is really pointless.

"Professionals" just use their 900 foot-pound impact wrenches, if they 
can line up on the bolt.  (And usually don't even need the 2084, since 
the hammering action tends not to turn the engine anyway)

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/