Manual conversion on '94 A4 V6

[urq]

Transaxles seem to be the least of the worries ... my experience with
investigating the job on a T44 was that the floor pan has a wider bulge for
the transmission, I think that by beating it down enough I could work the 3
pedal box in there ... of course I'm thinking LHD.  The two things I didn't
think about were the shifter mount differences and the exhaust system
differences.  

Given the idea is to build up a racer, cosmetics shouldn't be an issue, so
it should be quite doable ... 

Steve B
San José, CA (USA)

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of Tony Hoffman
Sent: Sunday, May 18, 2008 8:18 PM
To: Duncan Thomson
Cc: quattro at audifans.com
Subject: Re: Manual conversion on '94 A4 V6

As far as I've seen it should be that simple. Having said that, I've
never actually had two of them here (parted) at the same time. I know
the V8Q's use different floor pans for auto vs manual. So, that could
also be a possibility. I'd be willing to bet you will at least need
the top of the trans tunnel where the manual shifter attaches.

Perhaps someone out there with a bit more experience?

Tony Hoffman

On Sun, May 18, 2008 at 8:50 PM, Duncan Thomson
<duncan at systemcontrols.co.nz> wrote:
> Hi guys,
>
> I have a mate who's looking to convert his old A4 for club racing. It's
> a '94 2.6 V6, FWD.
> Currently auto, and he wants to switch to manual. He's only considering
> it, as it is worth almost nothing to him with such high mileage (280k
kms).
>
> Is this as simple as swapping flywheel / g'box / pedal box?
> Or are there any major gotchas?
>
> Thanks for any feedback!
>
> Duncan