CIS injector testing : any interesting DIY setup ?

[mike claire]

I used these guys last summer - they bench flow test each injector, then
replace screens, o-rings, clean them, sandblast and paint them.  Then they
flow test again.  They provide a complete report on each injector's
before/after performance.  Less than $20 each, and my 140K mile injectors
performed as new in the "after".

 http://www.witchhunter.com



Mike

On Thu, May 29, 2008 at 7:35 AM, Bares, Vittorio <Vittorio.Bares at nuance.com>
wrote:

> Where does one go to have injectors cleaned? What type of balancing is
> done?
>
> Thanks,
>
> Vittorio -
>
> -----Original Message-----
> From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com]
> On Behalf Of thejimrose
> Sent: Wednesday, May 28, 2008 8:57 PM
> To: quattro at audifans.com
> Subject: Re: CIS injector testing : any interesting DIY setup ?
>
> ok captain lazy here, but wouldn't it be MUCH easier just to send your
> injectors off to have them cleaned / balanced? you'd probably catch a
> price
> break if you offered to let them keep a few extras. and you'd vastly
> lower
> your chances of catching on fire.
>
> at least i did when i had them done for my triumph...
>
>
> > I've never done it, but it seems fairly straightforward - all you need
> > is a pressureizable reservoir (that can be gently/carefully
> > *de*pressurized!), a pressure gauge, and a valve, plumbed to an
> injector
> > hose.
> >
> >
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)
>