V8 Quattro Distributor cap removal
Ben Swann
benswann at verizon.net
Wed Oct 1 06:49:48 PDT 2008
That was it! 8mm bolt - 8mm socket + 4" extension + 1/4" ratchet did the trick.
Distributor caps were wasted - nothing left but carbon where there should be contacts.
No wonder the car was stalling out. Doesn't look like caps had ever been replaced.
Ben
-----Original Message-----
From: Ben Swann [mailto:benswann at verizon.net]
Sent: Wednesday, October 01, 2008 9:07 AM
To: 'Tony Hoffman'; 'Ed Kellock'
Cc: 'quattro at audifans.com'
Subject: RE: V8 Quattro Distributor cap removal
Thanks guys - I'll try that.
Ben
-----Original Message-----
From: Tony Hoffman [mailto:auditony at gmail.com]
Sent: Wednesday, October 01, 2008 8:29 AM
To: Ed Kellock
Cc: Ben Swann; quattro at audifans.com
Subject: Re: V8 Quattro Distributor cap removal
I'll second that. All the one's I've taken off were also 8mm. The Cizzy's themselves are
10mm, and the rotors are glued on from the factory. If you are replacing them, usually
they have to be broken off.
Tony
On Tue, Sep 30, 2008 at 11:02 PM, Ed Kellock <ekellock at gmail.com> wrote:
> All the dist caps I've removed have 8mm bolt heads.
>
> Ed
More information about the quattro
mailing list