Wiring diagram for Series III Coupe with 3A engine and KE-Motronic

[rob]

 Hi Al,

    It's an 89 model year, the 3A is the 2.0 8v engine. (I think very 
similar to that fitted to the Golf at the time)
   I think they also referred to KE Motronic as CIS-III. In other words it 
is Bosch K-Jet plus DPR, Lambda,knock sensor etc.

    Thanks Rob.

----- Original Message ----- 
From: "Al Streicher" <streichea001 at hawaii.rr.com>
To: "rob" <rob3 at hod3.fsnet.co.uk>; <quattro at audifans.com>
Sent: Monday, October 27, 2008 10:01 PM
Subject: RE: Wiring diagram for Series III Coupe with 3A engine and 
KE-Motronic


>
> Rob, what year?
>
> Al
>
> -----Original Message-----
> From: quattro-bounces at audifans.com
> [mailto:quattro-bounces at audifans.com]On Behalf Of rob
> Sent: Monday, October 27, 2008 10:38 AM
> To: quattro at audifans.com
> Subject: Wiring diagram for Series III Coupe with 3A engine and
> KE-Motronic
>
>
>
>
>    Hi Listers,
>
>     At the weekend I was going to troubleshoot a bad idle on my brothers
> car, but when I looked in the Haynes manual the wiring diagram for the ECU
> is only half present.
>
> For many of the other models in the Haynes manual the ECU diagram is 
> spread
> in two parts across one page, but when it comes to the KE-Motronic just 
> one
> part is featured. Look like a mistake, but it's the part I need as I 
> wanted
> to check the pinout to the lamda sensor.
>
>  So can anyone point me towards a copy of this part of the  diagram?
>
>    Thanks Rob.
>
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)
>
>