Ignition Switch

[TWFAUST at aol.com]

From: Kent McLean  <kentmclean at comcast.net>
Subject: Re: Ignition switch?

As  I write this I have one sitting in my car to replace the one in the
200 20V  TQA #3, and I bet my "new" '90 V8 will need one.

Word to the wise: get  the Audi OEM one, not an after market one.
 
If you haven't changed a 200 switch yet, get ready. A BFH is necessary to  
dislodge the steering column from it's  V-groove so you can reach the  switch. 
This is after you disconnect the joint at floor level. I think there is  a 
write up at 20V.
 
Tom



**************Hurry! April 15th is almost here. File your Federal taxes FREE 
with TaxACT. 
(http://pr.atwola.com/promoclk/100126575x1220714320x1201367638/aol?redir=http:%2F%2Fwww.taxact.com%2F08tax.asp%3Fsc%3D084102950001%26p%3D82)