Wiper Motor Park Position

[H]

On Tue, 21 Apr 2009 09:17:47 -0400, Hayes Myers wrote:

>My wipers work fine, switch works fine except they park vertically instead
>of horizontally... had a couple of times recently where they would park
>about 4" higher than horizontal, but this would fix itself by doing a swipe
>of the window with the switch. I searched the forum and found several
>'fixes'

It's just the crank that has slipped on the motor shaft. Loosen nut,
reposition, and tighten nut. Done. If the splines are badly damaged,
you may have to apply some sort of locking compund.