Instrument Cluster 200 10v

[Hayes Myers]

Thanks! I did a whole bunch of solering..probably made a mess. Did unhook
VR... but didn't do any soldering.  Next time I'm sucking all solder
out...cleaning up and doing each joint again. Easy work and makes for better
car. Even with my 'half' fix (half kill!) I'm happier. Things are working
better. 

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of Tihol Tiholov
Sent: Monday, December 07, 2009 2:07 PM
To: quattro at audifans.com
Subject: Re: Instrument Cluster 200 10v

Not sure, if this applies to you but here's a soldering fix for coolant and
fuel gauge malfunction on a '92 Eurovan.  It works, BTDT with many others.

http://bambergvr6.50megs.com/EV_instrument.htm
http://bambergvr6.50megs.com/eurovan_update.htm

Date: Mon, 7 Dec 2009 09:15:55 -0500
> From: "Hayes Myers" <hayesmyers at gmail.com>
> ...
>
> ...  I inadvertently turned ? turn  the
> coolant temp gauge (my bad).  Moved it back but think it is dead. (no
> activity after reinstall).  My gas gauge goes +/- infinity depending on
> mood. ?which I figure must be a solder bridge...
>
> Hayes Myers, P.Eng
>
> 91 200 TQM 10v
>


-- 
Tihol
_______________________________________________
quattro mailing list
http://www.audifans.com/mailman/listinfo/quattro
http://www.audifans.com/kb/List_information