MFTS Install and/or Thermostat 91 200 TQM 10V Re: quattro Digest, Vol 63, Issue 48

[suffolkd at aol.com]

10V?
I did some 20V pictures here:
http://www.quattro123.com/Audi200MFTSRemoval.htm

HTH -Scott by BOSTON


Message: 6
Date: Thu, 15 Jan 2009 13:32:29 -0500
From: "Hayes Myers" <hayesmyers at gmail.com>
Subject: MFTS Install and/or Thermostat  91 200 TQM 10V

Greetings!  I have an MFTS coming in on Saturday.  Wondering if there is
anything special I need to know in replacing this sensor?  What is the best
way to clean the contacts for the connection on it?   I'm noticing my car
temp gauge will work sometimes when I am going 'slow' ... on highway the
reading is very cold (left side of the gauge sweep)...but stop and go
usually will show a 'true' reading.  I hope the MFTS will fix the reading
issues... then it is a matter of do I need a thermostat or not?  Is there
anything tricky on doing the thermostat on this car?  I have the Bentleys
for reference as required..but the BTDT's tend to be more helpful
Cheers,  Hayes