Quick torque specs please...

[Huw Powell]

John Cody Forbes wrote:
> Ok so I took a guestimate and torqued the axle to 200lb/ft and tightened the 
> tie rod end tight by hand so I could drive home.
> 
> FYI the axle is 207lb/ft and the tie rod is 40lb/ft.

I was gonna say, axle nut to three or four grunts and tie rod to one.

But I had no reputable source for the specs.  Or knowledge of how much a 
"grunt" is for you.

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/