FW: Ignition Switch Failure Mode - BIG RED BUTTON

[Hayes Myers]

That's what the other Mr. Myers said as well. I like it :)... if only the
red button solved all audi problems :)

-----Original Message-----
From: Geraint Lloyd [mailto:geraintlloyd_qc at yahoo.ca] 
Sent: Friday, June 19, 2009 2:32 PM
To: 'Hayes Myers'
Cc: quattro at audifans.com
Subject: RE: FW: Ignition Switch Failure Mode - BIG RED BUTTON

You just HAVE to make it start by pushing one of these

http://www.staples.com/office/supplies/p1_Staples-Easy-Button-trade_130700_B
usiness_Supplies_10051_SEARCH



-----Original Message-----
From: Hayes Myers [mailto:hayesmyers at gmail.com] 
Sent: 19 June 2009 13:57
To: 'Tony Hoffman'; geraintlloyd_qc at yahoo.ca
Cc: quattro at audifans.com; 200q20v at audifans.com
Subject: RE: FW: Ignition Switch Failure Mode

I get a no crank sometimes...back off the switch and on again and it will
crank/start.  I bought the electrical portion of the assembly but have not
changed. I'm debating and leaning towards going to a dual toggle switch
configuration... turn the key to unlock the steering column, then switch one
toggles to ON position, with 2nd switch to toggle the starter.... I hope I
find some big red button I can use that will make things look cool as well.
(some sort of ejection button or the like..or what mad max would pull on his
car to give boost).