Knock sensors for 20v
Louis-Alain Richard
larichard at plguide.com
Tue Jun 30 07:28:22 PDT 2009
Since a knock sensor is a microphone, could it be tested by gently knocking
on it with the handle of a screwdriver and see if the timing is retarded ?
Louis-alain
-----Message d'origine-----
You can measure the resistance between the three pins on the knock
sensor. You should get infinite resistance between any and all pins.
Anything other than infinite means the sensor is bad.
-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com]
On Behalf Of rick hayllar
Sent: Monday, June 29, 2009 8:04 PM
To: quattro at audifans.com
Subject: Knock sensors for 20v
I suspect a faulty knock sensor as I hear a rhythmic pinging noise when
the
revs approach 3000 rpm, easing off the gas stops the pinging
Is there a simple test to pick which one is faulty.
Thanks for any advice.
Rick Hayllar
More information about the quattro
mailing list