ur-q driveshaft u-joint

[spectrum]

Looking at that thread now...
 
There are two types, one joint has circlips that hold it in, the other is staked... I've only seen the circlip version on ur-qs, seen both on 4kq's...

--- On Mon, 3/9/09, Andrew Dickinson <amdickinson at rogers.com> wrote:

From: Andrew Dickinson <amdickinson at rogers.com>
Subject: RE: ur-q driveshaft u-joint
To: "'DK'" <proleonk at gmail.com>, quattro at audifans.com
Date: Monday, March 9, 2009, 7:44 AM

I do believe that Dave is correct.  I had the PNs written down on a
scrap of paper that is eluding me for the moment.

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com]
On Behalf Of DK
Sent: March 9, 2009 10:41 AM
To: quattro at audifans.com
Subject: Re: ur-q driveshaft u-joint

If I am not mistaken, have a look on motorgeeks forum
http://www.motorgeek.com/phpBB2/viewtopic.php?t=24201&highlight=
The carrier bearing interchanges with a BMW part, the u joint
interchanges with a Suzuki Grand Vitara. Read up on the forum and you
will find out more. I hope this applies to the Urq aswell, as it
should have the same parts as the 4000.

Dave
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.0.237 / Virus Database: 270.11.9/1991 - Release Date:
03/09/09 07:14:00


_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)