10vt with K26/GT28RS

Joshua van Tol josh at spiny.com
Fri May 15 18:20:20 PDT 2009


For around that much, I've got a beater 5000 with megasquirt already  
installed. Granted, It's a v1 or V2 box, but the wiring, fuel rail,  
hoses, etc are all there, and it runs fine.

On May 6, 2009, at 12:05 PM, Cody Forbes wrote:

> Megasquirt should be a bunch less... Like $600.
>
> -Cody
> Sent from my iPod
>
> On May 6, 2009, at 9:29 AM, "Hayes Myers" <hayesmyers at gmail.com>  
> wrote:
>
>> I'm getting to the point where I'll have to spend on stuff ...like
>> injectors
>> etc.  I think for 1k I could convert to EFI with megasquirt... or
>> spend
>> dough on injectors etc for the CIS...  Probably best to look at the
>> EFI
>> route
>>
>> -----Original Message-----
>> From: Cody Forbes [mailto:cody at 5000tq.com]
>> Sent: Tuesday, May 05, 2009 10:28 PM
>> To: Hayes Myers; quattro at audifans.com
>> Subject: Re: 10vt with K26/GT28RS
>>
>> Hayes Myers wrote:
>>> Anyone running these with stock CIS? (or any different turbo?).  IS
>>> this a reasonable way to get more power outta the 200?
>>
>> That would be a waste of time and effort. The factor that limits
>> power on a
>> CIS 10v, even with all stock hardware, is the ability of the CIS to
>> deliver
>> enough fuel. Just turning the boost to about 2.25bar on the stock
>> turbo will
>>
>> get you to within about 10hp of the potential of the CIS. Some have
>> fixed
>> this with Mercedes injectors and other CIS tweaks, but for the money
>> spent
>> you are much better off going to EFI.
>>
>> -Cody Forbes
>> http://www.5000tq.com
>>
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information



More information about the quattro mailing list