[urq] 83 ur-q brake servo rebuild questions

[spectrum]

Hi Martin,
I do need a seal kit, but it is for the cast iron servo, not the alloy servo. Isn't there at least one seal that is different?
 
Thanks,
 
Todd

--- On Mon, 11/30/09, Martin Pajak <martin at quattro.ca> wrote:


From: Martin Pajak <martin at quattro.ca>
Subject: Re: [urq] 83 ur-q brake servo rebuild questions
To: "Keith Lloyd" <spotatashleys at hotmail.com>
Cc: "urq" <urq at pacbell.net>, urq at audifans.com, "'quattro list'" <quattro at audifans.com>
Date: Monday, November 30, 2009, 11:34 AM


Hi Keith,

Alan has sent me the rest of the seal kits that he had.
If anyone needs one, let me know.

Cheers

-- 
Martin Pajak

http://www.quattro.ca

1980 Porsche 924 Turbo, don't ask
1982 Audi Ur-quattro, SQ project
1982 Audi Ur-quattro, Euro rolling shell
1983 Audi 80 quattro, Euro 2-Tür
1983 Audi Ur-quattro, Complete parts car
1984 Audi Ur-quattro, The new project
1986 Audi 4000cs quattro, for sale
1987 Audi 4000s quattro, wintervagen mit 7A und 5 bolt :)



> Keith Lloyd
> Hello all
> I researched this a while ago and some kind soul pointed me in the
> direction
> of a great web page with pictues of a dismantled alloy servo that enabled
> me
> to dismantle a spare one I had. With a bit of research and some help from
> friends on the urq-list I managed to get all the seals and o-rings to
> rebuild the servo although thankfully I have not had to use it yet
> (equally
> I don't know whether it works properly or not - can't see why it
> shouldn't).
> The link to the web page is:
> http://www.quattro.ca/Urq/Brake_servo_guide.pdf
> Hope this helps.
> I'm sure I got one or more of the seals from Alan Pemberton (on urq list)
> who is somewhere on west coast Canada I think.
> Hope this helps
>
> Keith
> '87 WR - wet and windy Worcestershire, England
>
> ----- Original Message -----
> From: "urq" <urq at pacbell.net>
> To: "'quattro list'" <quattro at audifans.com>
> Cc: <urq at audifans.com>
> Sent: Monday, November 30, 2009 6:12 PM
> Subject: Re: [urq] 83 ur-q brake servo rebuild questions
>
>
> I don't usually go for spamming multiple lists, but since you didn't
> include
> the urq group I'll make sure folks there see your request.
>
> I still don't have BTDT on the actual rebuild, but I can tell you that
> yes,
> there are two types of hydraulic brake servos on the urq, a cast iron unit
> and an alloy unit.  You may want to search the archives and the KB, I do
> recall someone posting the list of parts required.
>
> Steve Buchholz
>
> -----Original Message-----
>
>
> I'm hoping this will be a quick one, but I think I know better...
>
> I'm looking for information on a rebuild for the hydraulic brake servo on
> an
> '83 ur-q.
> I've seen a pictures and a procedure on the rebuild but I'm not finding
> information like part numbers for the seals/o-rings, etc.
>
> Also are they're more than one type of servo used based on vintage or vin
> number?
>
> Any btdt?
>
> thanks,
>
> todd c
> _______________________________________________



_______________________________________________
quattro mailing list
http://www.audifans.com/mailman/listinfo/quattro
http://www.audifans.com/kb/List_information