The S6 rack replacement from hell continues

[Peter Golledge]

List folk I've really enraged the Audi gods on my S6 rack replacement.

 

So I've got the second rack in, those of you following my earlier saga may
recall that I ruined the first by putting the valved banjo in the return
position Jorgen gets full credit for shipping another ASAP and updating
their tags so that others might not follow my lead!

 

Now onto the issue at hand; the steering column will allow the rack to move
far enough back toward the firewall!  I can see the  splines fully engaged
on the rack so I know it is not binding.  I recall from the first install
that the column slid back easily enough to get the rack mounted up.  I get
some fore/aft movement but not enough to allow the driver's side of the rack
to sit in the correct position to be mounted.

 

Before I start taking apart the lower part of the dash, any BTDT for this
issue?

 

Regards

 

Peter Golledge