CS5000 turbo quattro blower motor

[Richard Thomsen]

Sorry, I neglected to say that he DOES have a Bently manual. However, he 
  just cannot get the blower box out of the car. It seems to be glued in 
there quite strongly, and he is afraid of breaking it.

Richard Thomsen

 >Cody wrote:

 > First, to work on these cars you REALLY should have a repair manual.
 > They are much more complex than many counterparts.
 > Bentleypublishing.com.

 > Second, you must remove the blower housing from the car to get in
 > without cutting. It's quite simple, but a pain in the butt at the same
 > time. The following is a short, simplified, hint at the process. You
 > need to disconnect the heater hoses, disconnect vacuum lines under 
the dash, and disconnect the duct work under the dash. Then you release the
 > strap holding the box. Now you need to lift the box out, which is
 > quite hard because it's glued in very firmly. Once the box is on the
 > floor you can remove the clips that hold the two halves together.

 > I'm sure somebody will post a proper writeup soon. In the mean time
 > try the Wiki knowledge base at Audifans.com.

 > -Cody (mobile)