brakes on '02 a4tavant

[Cody Forbes]

Besides if doing a fluid change at the same time there is no reason at all to bleed the brakes when changing pads/rotors.

The job is pretty simple, after taking the wheel off it's just taking out four bolts and then putting them back. You'll want to get some high temp grease to lube the slide pins as well as a wire brush to clean the areas that the pads slide on.

-Cody (mobile)

On Jul 31, 2010, at 8:45 AM, Grant Lenahan <glenahan at vfemail.net> wrote:

> rotors