CV joint - potential problem

[pdooley]

That's a common error with rezzapa CV's.  The cage isn't backwards, just out
of phase.

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of Ed Kellock
Sent: Sunday, June 13, 2010 11:14 PM
To: 'NIck Miller'; 'Radek'
Cc: quattro at audifans.com
Subject: RE: CV joint - potential problem

I was going to say something similar.  A friend and I disassembled and
cleaned one of his CVs on his urS4 and when the CV was reassembled, it would
bind once the axle nut was tightened fully.  Turns out we had it reassembled
with one part backwards.  I don't recall the scenario very well, but sounds
like it must have been the cage that we had backwards.

Ed