Starter Switch

[TWFAUST at aol.com]

I replaced a starter switch in my '90, a lot of years ago. I did it  with 
aid of a well documented web article of the replacement in a 200q20v avant.  
I only remember the scary part, taking a BFH to give a good whack to the  
steering column. This is necessary to free it from the aluminum "V" which 
mounts  it to the bottom of the dash. It seems to me that was necessary to get 
access to  the set screws on the switch. On the whole, I recall it as being 
easier than  replacing the switch in my '87 TQ, mostly because the instrument 
cluster was  bigger and gave more hand room after removal.
 
I can't find the article right now, but my memory connects it with Chris  
Miller and the old "20 Valve" website.
 
Oh, break the u-joint at the floor before whacking the coulumn.
 
Tom Faust