Key Start at Cold Temperatures

[Tony Hoffman]

That's the small slotted screw that holds it in place. You basically pry
(break) the red stuff out of there, then undo the screw.

Tony

On Mon, Feb 28, 2011 at 3:01 PM, Max Hoepli <mhoepli at vif.com> wrote:

> I am in the process of changing the ignition switch. I took out the speedo
> housing. I notice a red dot about 2 cm from the electrical switch end on
> top
> of the cast ignition shaft. That is lining up with the hole part of the
> white plastic housing of the ignition switch. What is under red colouring?