Blower motor resistor values

[Chris perry]

I wasn’t sure if it before but after having checked out the switch and the wiring harness (continuity test) I am now. I'll be ordering one tomorrow. I had spent the weekend replacing the heater core and the blower motor and the resister is way easier to replace with the dash out so I guess I'll wait another day to put the dash back in.

Chris

-----Original Message-----
From: Huw Powell [mailto:audi at humanspeakers.com] 
Sent: Sunday, October 23, 2011 6:16 PM
To: Chris Perry
Cc: quattro at audifans.com
Subject: Re: Blower motor resistor values

But it is broken.

On 10/23/2011 8:06 PM, Chris Perry wrote:
> I know, but I hate replacing things if they are not broken.
>
> Chris
> -- Chris Perry
>
> Huw Powell <audi at humanspeakers.com> wrote:
>
>     Those are cheap, why not just replace it?
>
>     On 10/23/2011 1:11 PM, Chris perry wrote:
>     >  Hi all,
>     >
>     >  Patient is an 90 90q. I have an issue where only speeds three and four are
>     >  working for my heater blower motor.  I checked the resister with a multi
>     >  meter and got some fairly "normal" readings (4-ish  ohms overall).  Does
>     >  anyone know what these values are supposed to be?  I don't see it listed
>     >  anywhere in the Bentley.  IS there another test that will determine a
>     >  good/bad resistor.  I am going to the fan speed switch today to see if it is
>     >  just the contacts on the switch but I'd like to know if anyone else has ever
>     >  measured the values between different pins on the resistor.
>     >
>     >
>     >
>     >  Thanks,
>     >
>     >  Chris Perry
>     >
>     >
>     ------------------------------------------------------------------------
>
>     >  quattro mailing list
>     >  http://www.audifans.com/mailman/listinfo/quattro
>     >  http://www.audifans.com/kb/List_information
>     >
>     >
>     >  -----
>     >  No virus found in this message.
>     >  Checked by AVG -www.avg.com  <http://www.avg.com>
>     >  Version: 2012.0.1831 / Virus Database: 2090/4569 - Release Date: 10/23/11
>     >
>     >
>
> No virus found in this message.
> Checked by AVG - www.avg.com <http://www.avg.com>
> Version: 2012.0.1831 / Virus Database: 2090/4570 - Release Date: 10/23/11
>

-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1831 / Virus Database: 2092/4570 - Release Date: 10/23/11