Product to Slow Down Corrosion of Components in the Engine Bay
Huw Powell
audi at humanspeakers.com
Tue Oct 25 18:03:15 PDT 2011
Powder coating for as much as possible; that spray paint that turns rust
hard and black for the block, a little high-temp clear spray paint for a
freshly cleaned head...
On 10/25/2011 6:32 PM, Marc Boucher wrote:
> Sorry if I was too long winded before...I'll be more succinct: what products do you guys generally use to protect the metal components inside your engine bay?
>
>
> From: mboucher70 at hotmail.com
> Sent: Monday, October 24, 2011 8:33 PM
> To: quattro at audifans.com
> Subject: Product to Slow Down Corrosion of Components in the Engine Bay
>
>
> Preparing the car for winter and thought I'd reach out to see what recommendations I could get for a product to slow down corrosion of components in the engine bay. The roads are salted in the winter, and sooner or later a certain amount of salt must make its way into the engine bay. Otherwise, its just the combination of heat, oxygen, and time that's at work.
>
> I've got corrosion starting to form over multiple components. It might be purely cosmetic in some cases, such as the fuel filter which will probably be replaced soon enough anyway. And I believe that the fuel filter, and other items are made from aluminum or a type of metal where the corrosion (Aluminum Oxide) prevents further corrosion. Same thing for the fitments that connect the fuel line to the fuel filter and then the Fuel Injector distributor...they're either copper or brass, so they won't rust through, but they will get surface oxidization.
>
> Other items, like the sleeves of the fuel injection lines, are iron, and I'm seeing rust come through. Then there's the myriad of screws that aren't painted.
>
> If its something that I was going to use to coat much of the engine, some of it might end up on rubber or plastic components, thus the ideal product would also protect rubber and plastic, or at least not harm them.
>
> One substance often used to prevent rust is oil. But coating your engine with Oil makes for something very unpleasant to work with. And from what I understand, engine oil causes rubber hoses to deteriorate.
>
> The next item that came to mind was Armor All. But further reading led me to believe that Armor All and other silicon based preservatives actually damage rubber and plastic over time.
>
> So, what do people recommend for treating their engine bay components to slow down oxidation, corrosion, and general deterioration?
>
> Thanks for any suggestions,
>
> MC
>
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1834 / Virus Database: 2092/4574 - Release Date: 10/25/11
>
>
More information about the quattro
mailing list