removing antenna junk from glass

[Mark Rosenkrantz]

+1 on the solvent and razor blade.

On Tue, Feb 28, 2012 at 3:57 PM, Vincent Gelinas <vrgelinas at gmail.com>wrote:

> Last time I did one of those, I soaked it in goo gone, let it sit for about
> a half hour, then used a razor blade with a little wd40 for lubrication.
> That and some elbow grease.
> On Feb 28, 2012 3:52 PM, "Huw Powell" <audi at humanspeakers.com> wrote:
>
> > Hey gang,
> >
> > Just wondering if anyone has any (hopefully successful) experience with
> > removing those glue-on "through the glass" antenna mounts, before I just
> > use an escalating series of solvents (alcohol, xylol, acetone, toluene,
> > MEK...) in a horrible experiment.
> >
> > They are ugly and make it a pain to clear snow off the rear window!
> >
> > Thanks in advance,
> >
> > Huw
> > ______________________________**_________________
> > quattro mailing list
> > http://www.audifans.com/**mailman/listinfo/quattro<
> http://www.audifans.com/mailman/listinfo/quattro>
> > http://www.audifans.com/kb/**List_information<
> http://www.audifans.com/kb/List_information>
> >
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information
>