C4 (1995 A6) front bumper removal

[Steve Mills]

Not from the factory. 

On May 5, 2012, at 10:25 AM, Douglas Fifield <douglas.fifield at gmail.com> wrote:

> Aren't there also phillips head screws in the wheel wells that hold
> the liner to the bumper edges?
> 
> D.
> 
> On Sat, May 5, 2012 at 9:09 AM, Tony Hoffman <auditony at gmail.com> wrote:
>> I also like to have an 8mm tripple square (think CV bolts) in case they
>> strip out. Pound it in there, and it will get the bolt out.
>> 
>> Tony
>> 
>> 
>> 
>> On Sat, May 5, 2012 at 8:45 AM, Steve Mills <s.b.mills at gmail.com> wrote:
>> 
>>> 6mm, but sometimes the allen bolts don't want to cooperate and you need a
>>> 13mm socket for the bumper shocks instead.
>>> 
>>> On Fri, May 4, 2012 at 8:24 PM, Robert Myers <bob at chips-ur-s.com> wrote:
>>> 
>>>> 
>>>> IIRC, all you need is a fairly long 5 mm Allen wrench (6 maybe?).
>> _______________________________________________
>> quattro mailing list
>> http://www.audifans.com/mailman/listinfo/quattro
>> http://www.audifans.com/kb/List_information
> 
> 
> 
> -- 
> Douglas in MN
> 95.5 Audi S//6 Avant
> 08 Prius Touring (50 mpg reg)
> 73 BMW R60/5 mit Toaster Tank
> 82 BMW R100RT mit Russkie Sidecar
> ABC# 11822