C4 (1995 A6) front bumper removal

[Steve Mills]

Yes, they are different. The ends of the S6 bumper are flared to match the wider fenders of the S6. 

On May 6, 2012, at 9:02 PM, Liben Audi <libenaudi at gmail.com> wrote:

> Is there a difference between an 95 A6 front bumper and a 95 S6 front
> bumper? What I'm getting at is will a 95 A6 front bumper fit on a 95
> S6 and vice-versa.
> 
> On 5/5/12, Steve Mills <s.b.mills at gmail.com> wrote:
>> Not from the factory.
>> 
>> On May 5, 2012, at 10:25 AM, Douglas Fifield <douglas.fifield at gmail.com>
>> wrote:
>> 
>>> Aren't there also phillips head screws in the wheel wells that hold
>>> the liner to the bumper edges?
>>> 
>>> D.
>>> 
>>> On Sat, May 5, 2012 at 9:09 AM, Tony Hoffman <auditony at gmail.com> wrote:
>>>> I also like to have an 8mm tripple square (think CV bolts) in case they
>>>> strip out. Pound it in there, and it will get the bolt out.
>>>> 
>>>> Tony
>>>> 
>>>> 
>>>> 
>>>> On Sat, May 5, 2012 at 8:45 AM, Steve Mills <s.b.mills at gmail.com> wrote:
>>>> 
>>>>> 6mm, but sometimes the allen bolts don't want to cooperate and you need
>>>>> a
>>>>> 13mm socket for the bumper shocks instead.
>>>>> 
>>>>> On Fri, May 4, 2012 at 8:24 PM, Robert Myers <bob at chips-ur-s.com>
>>>>> wrote:
>>>>> 
>>>>>> 
>>>>>> IIRC, all you need is a fairly long 5 mm Allen wrench (6 maybe?).
>>>> _______________________________________________
>>>> quattro mailing list
>>>> http://www.audifans.com/mailman/listinfo/quattro
>>>> http://www.audifans.com/kb/List_information
>>> 
>>> 
>>> 
>>> --
>>> Douglas in MN
>>> 95.5 Audi S//6 Avant
>>> 08 Prius Touring (50 mpg reg)
>>> 73 BMW R60/5 mit Toaster Tank
>>> 82 BMW R100RT mit Russkie Sidecar
>>> ABC# 11822
>> _______________________________________________
>> quattro mailing list
>> http://www.audifans.com/mailman/listinfo/quattro
>> http://www.audifans.com/kb/List_information
>> 
> 
> -- 
> Sent from my mobile device