95 90q no spark, wiring assistance please

brian hoeft qweblog at gmail.com
Wed May 30 11:31:40 PDT 2012


Welp, just want to share the latest with Laverne (this merciless '95 90q)

After about 2 years of sitting with lack of motivation on the owners
behalf, due to a snapped t-belt that failed while running on a bad clutch,
while running on a TOTALLY rebuilt suspension,, Laverne finally roared to
life after splicing in a new wire between the POS and ECU.

What makes the story more special than the re-birth of his dearly beloved
(dumb love) Laverne, is that early this very same morning, he also became
an official father of a 6.4oz human boy child.

Serendipity? Quite possibly, and I'll revel in the moment just the same.

Now to button her up and deal with the other thousand problems...

-Brian



On Tue, May 29, 2012 at 3:00 PM, brian hoeft <qweblog at gmail.com> wrote:

> Apparently I was on my heels for the past week.. Well this morning I awoke
> on my toes and had that oh crap moment, called a colleague with Alldata,
> ran to his shop for printouts and am now on the way to resolving the issue.
>
> At appears that the culprit is somewhere between pin 1 (gray/yellow) at
> the POS harness and pin 15 at the ECU (red harness).. No continuity.
>
> The other pins have continuity respectively:
>
> Pin 2 (brown/red) at POS and Intake Manifold Ground
>
> Pin 3 (green/gray) at POS and Pin 18, red ECU harness
>
> Pin 4 (green/white) at POS and Pin 17, red ECU harness
>
> If someone has the time (to waste?) and resources to confirm my findings
> are appropriate with something by Bentley Publishers, I would like to
> confirm that these wires to have a direct path, from the POS harness to the
> ECU, as Alldata diagrams allege.
>
> Looks like the mouse I instinctively stomped the sh** out of as he
> mistakenly ran towards me after jumping from the car while lifted, may have
> gotten the last laugh.. eff'em if he can't take a joke!
>
> -Brian
>
>
>
> On Mon, May 28, 2012 at 1:26 PM, brian hoeft <qweblog at gmail.com> wrote:
>
>> Still no help on this. Guess I'm buying that disk set from Bentley
>> Publishers tomorrow.
>>
>>
>>
>>
>>
>>
>> On Mon, May 21, 2012 at 10:11 AM, brian hoeft <qweblog at gmail.com> wrote:
>>
>>> Hi list,
>>>
>>> Of course out of all the Bentley manuals I have from early eighties to
>>> present, the 94&95 90's are not included.
>>>
>>> I am a paper book guy and would begrudgingly get the (only available in)
>>> CD for close to a hundred notes if need be. Otherwise, I ask here first.
>>>
>>> To be precise, I am looking for the J271 relay wiring and for the POS.
>>> The whole car not being far from a POS itself is not very inspiring, but
>>> the owner is in love with it and in too deep to walk away.
>>>
>>> Looked for sources online and finding a lot of dead links or not
>>> detailed enough info.
>>>
>>> Her name is Laverne and she is a 95 90q with the AFC V6 & 5 speed.
>>> Please help me wake her up.
>>>
>>


-- 
*       -Brian*
      [blinders off&ear <http://208.53.138.125:8068/>plugs out]


More information about the quattro mailing list