Clicking noise under '91 CQ when turning

[Kneale Brownson]

Easier than most timing belts, gas tank R&R, motor or tranny mount replacing, etc. that all  these old Audis seem to require at some point. 

Sent from my iPhone

> On Dec 6, 2013, at 6:15 AM, Grant Lenahan <glenahan at vfemail.net> wrote:
> 
> You enjoy removing, disassembling, and re-packing CV joints?
> 
> really?
> 
> If oyu hand it to someone else, nothing's a big job.
> 
> Grant
>> On Dec 5, 2013, at 9:28 PM, Huw Powell wrote:
>> 
>> It's not really a big job.  You need a rebuilt axle/cv shaft.  Your mechanic bought you some time, good for her.
>> 
>>> On 12/5/2013 7:14 PM, Grant Lenahan wrote:
>>> the CV joints, and its a big job. If its clicking, typically the joint is failing.
>>> 
>>> Grant
>>>> On Dec 5, 2013, at 6:51 PM, Christopher Gharibo wrote:
>>>> 
>>>> There is a clicking noise on my '91 Coupe Quattro when I turn or decelerate on
>>>> cold mornings. There is nothing loose under the car. 3-4 years ago my mechanic
>>>> told me that he lubricated that half-shafts and that was effective. The noise
>>>> is now beginning to come back.
>>>> 
>>>> My question is where exactly do you lubricate on the half-shafts?
>>>> 
>>>> Thanks!
>>>> 
>>>> 
>>>> _______________________________________________
>>>> quattro mailing list
>>>> http://www.audifans.com/mailman/listinfo/quattro
>>>> http://www.audifans.com/kb/List_information
>>> 
>>> _______________________________________________
>>> quattro mailing list
>>> http://www.audifans.com/mailman/listinfo/quattro
>>> http://www.audifans.com/kb/List_information
>> _______________________________________________
>> quattro mailing list
>> http://www.audifans.com/mailman/listinfo/quattro
>> http://www.audifans.com/kb/List_information
> 
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information