[V6-12v] Fwd: Motor won't start - G28 - engine speed sensor

[Huw Powell]

I hope trying to start it with those connectors reversed didn't damage 
something...

- Huw

On 1/3/2013 4:04 PM, Andrew Muff wrote:
> Argh! Ok, red herring. After a day and a half of tracing down this
speed sensor, turns out that's not it. Turns out the speed sensor is a
white plug and 1 of the 2 plug wires from the ignition coil is a white
plug. They were reversed.
>
> But problem not solved. Now ECU throws no codes. And engine won't
start. Just tested for spark and both #1 and #4 cyl are dead, so the
whole ignition coil has no power. I've traced back the wires and
confirmed these are plugged into the right harness by confirming wire
colors with the schematic.