UrS6 rear upper control arm - a few questions?

Joshua Van Tol josh at spiny.com
Mon Oct 21 05:20:20 PDT 2013


Those are Meyle brand though. Junk usually.


On Sun, Oct 20, 2013 at 9:46 PM, Scott Phillips <Scottp at ippe.com> wrote:

> They are only $62 complete..
>
>
> http://www.autohausaz.com/search/product.aspx?sid=2zxcb1454poghcqhokz4dgri&makeid=800002@Audi&modelid=1009370@S6TURBO&year=1995&cid=27@SuspensionSystem&gid=19632@SuspensionTie Rod
>
> Scott
>
> -----Original Message-----
> From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com]
> On Behalf Of Franco Barber
> Sent: Sunday, October 20, 2013 10:01 PM
> To: Quattro List
> Subject: Re: UrS6 rear upper control arm - a few questions?
>
> Yes, the inner and outer end are available separately, but it's not
> economically feasible.
>
> If you look at this page:
>
> www.audionlineparts.com/parts/1995/Audi/S6/Base?siteid=215021&vehicleid=72587&diagram=1350730
>
> Item 8 is the whole tie rod, 9 is the outer, and 10 is the inner.
> But look at the prices:
> About $170 for the whole assembly, but $244 for the outer and $222 for the
> inner.  You could buy the whole assembly, throw away the part you don't
> need, and still come out ahead.
>
> As to the left and right being different, yes they are, at least the inner
> is different, because the bolt that comes down from the ball joint faces to
> the rear just a bit. The outer might be the same or it might not, it's much
> harder to tell compared to the inner.
>
> Franco
>
> (I just changed the right rear tire rod on my 95 a6q last week.)  On Oct
> 20, 2013 8:57 PM, "Radek" <radek at uniserve.com> wrote:
>
> > Hello Audifans;
> >
> > Would anyone know if part number 443-505-153B (outer end of the
> > control arm that attaches to the wheel hub) is available separately?
> > Searches online only come up with the whole arm (443-505-351/2P).
> > Even better, is it possible to change just the rubber bushing, since
> > the rest is still good?  It seems that the bushing is the wear part, I
> > have two more sets from a V8Q and in both cases just the bushing is gone.
> > Also, is there really a right and left control arm (that's what FA
> > says) - they look pretty much the same!
> > Thanks!
> >
> > Radek
> > 91 V8Q 5-sp
> > 88 90Q
> > 96 UrS6
> > _______________________________________________
> > quattro mailing list
> > http://www.audifans.com/mailman/listinfo/quattro
> > http://www.audifans.com/kb/List_information
> >
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information
>


More information about the quattro mailing list