quattro Digest, Vol 131, Issue 9

[cody at 5000tq.com]

H&R will not supply the data unfortunately (and I'm one of H&R's direct US 
importers). I'm an Eibach importer too, but this springs have been 
discontinued for so long nobody can find the info (not certain how hard they 
looked though). I might just end up testing a stock one and making my rate 
change based on that since the Eibachs don't seem very much stiffer at all, 
though I suspect my set has gotten weak as the rear sits lower than the 
front by a good bit.

-Cody

-----Original Message----- 
From: DeWitt Harrison
Sent: Wednesday, September 17, 2014 9:54 PM
To: Quattro List
Subject: Re: quattro Digest, Vol 131, Issue 9

Sorry, no. But I may be able to come up with the H&R p/ns for a conversion
to urS4 "progressive" rear springs. I do not know the spring rates
involved. Maybe H&R can supply this data. (This conversion may require some
urS4 spring perch parts as well.

DeWitt Harrison
'88 5ktq plus some

On Wed, Sep 17, 2014 at 1:00 PM, <quattro-request at audifans.com> wrote:

> Send quattro mailing list submissions to
>         quattro at audifans.com
>
>
>    1. Eibach lowering springs (John Cody Forbes)
>
>
> ----------------------------------------------------------------------
>
> On Wed, 17 Sep 2014 12:45:57 -0400
> From: "John Cody Forbes" wrote:
>
> Does anybody possibly have the part number off a type44 Eibach rear
> lowering spring? Eibach’s part numbers give away the springs diameter,
> length, and rate. I’ve got Eibachs on my car but can’t make out the number
> and I’m looking to change to a higher rate spring.
>
> -Cody
>
>
_______________________________________________
quattro mailing list
http://www.audifans.com/mailman/listinfo/quattro
http://www.audifans.com/kb/List_information