Coolant Temp Sensor in EARLY 12V 2.8 (1992 FWD 100S)

[Grant Lenahan]

That was quick!
Every diagram helps. I do have several diagrams ( newer type) and a general idea where it is. Thanks,

Still looking for any BTDT on the old style.

Grant
On Aug 18, 2015, at 11:38 AM, Kent McLean <kentmclean at comcast.net> wrote:

> Grant wrote:
>> A friend has a 1992 (?) 100S front wheel drive 2.8 V6, with a failed CTS.
>> 
>> I just learned (getting the part) that this is not the clip-in style i am familiar with, and all the tutorials and videos cover, but an earlier screw-in version.
>> 
>> Does anyone have any BTDT to make my job easier, or even a link to a video/tutorial/diagram of where it is exactly and how to get at it on the earlier cars?
> 
> Here’s a diagram of a 2.8 V6, but I don’t know if it shows the screw-in CTS or clip-in one.  The CTS is to the left rear (upper right in the diagram).
> 
>   http://www.12v.org/engine/index.php?section=cl&view=cool <http://www.12v.org/engine/index.php?section=cl&view=cool>
> 
> —
> Kent McLean
> ’02 VW Beetle TDI and lots of ex-Audis, including Bad Puppy
> 
> 
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information