Headlight Adjustment

[Ti Kan]

Yes, you can adjust with the screw(s).  They are meant to set the baseline but if your auto-leveling isn't working then the screws will do.

-Ti
-- 
Sent from my commlock


> On Feb 17, 2015, at 5:24 PM, Vincent Gelinas <vrgelinas at gmail.com> wrote:
> 
> Hi, all
> 
> I've googled this to death to no avail, so I'm asking the collective knowledge of the group. 
> 
> Patient is a 2004 C5 A6qA. I have the self leveling bi-xenon headlights and faulty level sensors in the suspension. Until I have a job and can replace those and do this properly, I've pulled the leveling fuse for the headlights to keep the annoying error messages at bay.  
> 
> They are currently pointing a bit low. Is there a way to adjust them without using VCDS to disable the motors first (I.e just using the adjustment screws), or does it need to be done "properly"? 
> 
> TIA,
> 
> Vincent 
> 
> Sent from my iPhone
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information