Re: [s-cars] No Start --94 UrS4

Sat Nov 28 20:58:38 PST 2015

Gary
If the car isn't running you'll always get the code for crank sensor....my guess would be the cam sensor. 
Dave Forgie sends out a reminder almost monthly about "the things that can, and will leave you stranded at the side of the road.  The link is here:

http://forums.quattroworld.com/s4s6/msgs/250089.phtml

General info is here:

http://forums.quattroworld.com/s4s6/msgs/15184.phtml

Have you pulled codes?  Are you getting a check engine light at all? You may or may not get a code for a failing/failed can sensor. I've had it happen both ways. OE unit threw a code when it failed. The group buy replacment didn't. YRMV.

Sorry that's not more help and hopefully someone's responded to you directly by now. I've been on the road for 8 hours and haven't checked email till just now. 

Wylie Bean

Sent on the new Sprint Network

----- Reply message -----
From: b1biker at aol.com
To: <s-car-list at audifans.com>, <quattro at audifans.com>
Subject: [s-cars] No Start --94 UrS4
Date: Sat, Nov 28, 2015 8:59 PM

I shut the above vehicle off after it had run for about 10 minutes and now it won't start. What I've done:so far
Replaced the fuel pump; it was producing minimal pressure and flow
Replaced the Crank Position Sensor (A repair shop told me this was a common failure & gave me a print-out from the Bentley on testing this component.) It tested as defective.
Right now I find myself 120 miles from home with my Bentley languishing on my computer . Any help in diagnosing the problem/finding a solution will be greatly appreciated. I'd really like to get home soon.
Gary Meier
_______________________________________________
S-CAR-List mailing list
http://audifans.com/mailman/listinfo/s-car-list
http://www.audifans.com/kb/List_information