selling 2 Avants, a 1989 200TQ Avant and a 1990 20V TQ

[Cody Forbes]

Generics suck, they never fit right and they don't last very long. 

I am working on getting one of the prototype racing axle companies to supply silicone boots, but I need to take the axle out to measure it first. I never saved rear axles from my parts cars thinking I'd never need something so silly that is a wear item :-(.

-Cody Forbes (mobile)

> On Jan 30, 2018, at 12:18 PM, Kneale Brownson <kneale at coslink.net> wrote:
> 
> There should be generics available
> 
> Tediously fingered on my iPhone
> 
> 
>> On Jan 30, 2018, at 8:56 AM, Eric Sanborn <esanborn at gmail.com> wrote:
>> 
>> You could 3D print the CV boot or tape together the one you have and use
>> either as a pattern for a silicone mold.  Then use that mold to pour
>> urethane in it. Still a lot of work and sad that Audi has ditched us.
>> 
>> -Eric
>> 
>>> On Tue, Jan 30, 2018 at 9:40 AM, Cody Forbes <cody at 5000tq.com> wrote:
>>> 
>>> There was a time when I would have driven the 14 hours and been knocking
>>> at your door last night. These days I'm kinda feeling the same way as you.
>>> One of my cars needs a right rear inner CV boot. They don't exist.
>>> 
>>> Audi has gone through ETKA and started removing part numbers from 5000's
>>> so we can't even cross reference items anymore or Google for NOS or
>>> anything. The part number is just shown as "NLA". Not a note, not appended
>>> to the end of the number, nope... They completely removed the number and
>>> replaced with the letters NLA. This has been the case for dozens of items
>>> I've been looking for recently. I 3D printed a new center support bearing
>>> rubber insert from polyurethane, but I can't print a CV boot :-(.
>>> 
>>> -Cody Forbes (mobile)
>>> 
>>>>> On Jan 29, 2018, at 5:09 PM, Montague, Scot <smontagu at mail.smu.edu>
>>>> wrote:
>>>> 
>>>> After replacing the rack, all four brake calipers plus the master and
>>> slave in the '89, the needed hydraulic hose was nearly impossible to find,
>>> and the mechanic didn't want to do it. I have grown tired of chasing down
>>> parts for these wonderful cars and they are sitting idle. The 20 V needs a
>>> new fuel pump and has been sitting for a few years. We want to sell, not
>>> see them scrapped. We have a lot of odds and ends to go with the cars (a
>>> set of Fuchs, sport seats etc.) We want someone to take them by trailer,
>>> will accept $2K for both?
>>>> 
>>>> Scot Montague '90
>>>> Operations Manager
>>>> Dedman College, SMU
>>>> 206 Dallas Hall
>>>> 214/768-2809 cell 214-497-2773
>>>> 
>>>> _______________________________________________
>>>> quattro mailing list
>>>> http://www.audifans.com/mailman/listinfo/quattro
>>>> http://www.audifans.com/kb/List_information
>>> _______________________________________________
>>> quattro mailing list
>>> http://www.audifans.com/mailman/listinfo/quattro
>>> http://www.audifans.com/kb/List_information
>> _______________________________________________
>> quattro mailing list
>> http://www.audifans.com/mailman/listinfo/quattro
>> http://www.audifans.com/kb/List_information