Re: [20v] ‘91 coupe - heater core temp sensor

[Wylie Bean]

I was a little confused by this question because I figured he meant the horses running to and from the heater core going into the firewall that have the heater control valve and the bleed screw. I don't know of any metal options, nor do I recall a T like there is on the C4 S-cars Peter.  I was able to "repair" the bleed screw by silicone a nylon nut into the opening and using a nylon bolt to seal it. Not sure of any other failure points except the heater control valve itself.


Wylie BeanGreensboro NC 90 CQ91 90Q20V91 200Q20V92 UrS401 S408 Q7
-------- Original message --------From: Peter Schulz <pcschulz at gmail.com> Date: 5/14/18  8:58 AM  (GMT-05:00) To: Christopher Gharibo <cgharibo at usa.net> Cc: 20V List <20v at lists.20v.org>, quattro at audifans.com Subject: Re: [20v] ‘91 coupe - heater core temp sensor 
Chris:
If you mean the metal T ?There have been some aftermarket options, Issam Abed, made some, but i think he’s sold them all
-Peter

On May 13, 2018, at 11:50 PM, Christopher Gharibo <cgharibo at usa.net> wrote:
Is there a metal option for the hose that houses the temp sensor right by the
heater core hoses?

CG 

_______________________________________________
20v mailing list
20v at lists.20v.org
http://lists.20v.org/listinfo.cgi/20v-20v.org


Peter Schulz1990 Audi CQ Pearl White1991 Audi CQ Silver1991 Audi CQ Black1993 Audi S4 Black1995 Audi S6 Cashmere1995 Audi S6 Avant Silver