[s-cars] Davtron IC gauge

[Kirby Smith]

You need to measure the resistance of the good probe (assuming that they
used the same type for each side) at two temperatures.  From that
information, the type of thermistor can be determined, and its room temp
value.  Then, you would need to search in the catalogs of electronics
distributors (Newark, Allied Electronics, Digikey, etc.) for a like
type.  If you don't need the needle-like shape, then your options are
much more extensive.

kirby

Robert Pastore wrote:
>
> Hap:
>
> I have an old HKS IC in/out temp gauge that I suspect was manufactured by
> Westech or Davtron.  It's probes (thermocouples?) are needle-like, and fit
> though a 1/8" NPT fitting.  One of the thermocouples is broken -- Do you
> have any idea where to source something like?
> HKS-USA didn't even know they ever made such a gauge.
> I have the Aircraft Spruce Catalog, but could not find one in it.
> Any ideas?
>
> Bob
>
> -----Original Message-----
> From: CaptMagu at aol.com [mailto:CaptMagu at aol.com]
> Sent: Friday, August 02, 2002 10:21 AM
> To: Airbil at aol.com; s-car-list at audifans.com
> Subject: Re: [s-cars] New urS Cabin Accessory?
>
> Bill, Bill, Bill,
>
> I've already put that space to use as a receptacle for my Davtron I/C temp
> guage. What am I supposed to do now?
>
> Hap, MP3less but with plenty of other data in Evergreen, Maguire
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list