[s-cars] In Car MP3 Players

Charles Baer charlie at istari.com
Mon Aug 5 12:21:01 EDT 2002


> -----Original Message-----
> From: Matt Russell [mailto:skippertgore at hotmail.com]
> Sent: Sunday, August 04, 2002 8:09 PM
...snip...
> These all sound like a good ideas.  But going back to
> Thompson's post with
> the pic of the back of his radio....
>
> http://members.rennlist.com/rennwagen/gammaradio.jpg
>
> I think you might be able to use the 2 inputs in the changer
> harness labeled
> " Line In L & R" should be where the changers' sound input
> comes in.  Tap
> into those wires, and you should be set.
>
> Note again that I am only guessing that this is where the
> signal comes in
> from the changer.
> Anyone have some BTDT on the Bose units?

The inputs are empty on mine, does anybody know how to activate
the CD analog input w/o having a changer plugged into that socket ?

I had mine out a year ago, made these conclusions about the pins:

CD SDA - CD serial data ( track #, status )
CD SCL - CD serial clock
+12V   - battery +V
-/ -+  - switched +V
CD gnd - CD audio ground
NF-    - negative frame ground (for power)
L,R    - left and right pre-amp level input

I couldn't figure out how to enable the input, assumed that not
having a CD changer connected to the data circuit kept the input
section disabled.  Went with the RF modulator that came w/ the
Sony changer I pulled from my V8.

The "What are these?" section in the photo is for the inst cluster
display.

Charlie



More information about the S-car-list mailing list