[s-cars] Question regarding the Eibach Spacer

[jeff posto]

--
[ Picked text/plain from multipart/alternative ]

Hey there,
I just talked to US Eibach technical support. For the Pro Kit 1529.140 the
plot thickens.. I explained the rear spacer we are seeking to raise the rear about 10mm.
Tech says..he recalls a special case with this S4 type, and he sees a note, " for this kit, front springs are too tall, therefore recommend P/N 1528.140 in front, (rear springs are the same) PLUS add
P/N 1529F Perch to the front dampers to raise the car to level."
This is not what I expected, so
He transferred me to the Eibach TechLine, where I deposited a voicemail.
Frederic, call Paris Eibach and determine what you can learn.
Jeff


 Frederic L'Huillier wrote:Hi,

I had Eibach springs recently installed on my car (S6 Plus) as well as Koni
shocks. I find the rear is too low compaired to the front even if the ride
is much better with this set up than with the stock one. No possible
comparison possible specially on track. Talking to various people from the
list as well as looking at the excellent web site www.urs4.com from our
master Jimmy Pribble, there is actually a spacer made by Eibach to fix it. I
am talking about the 50mm x 12mm steel spacers. Does anybody has the
reference for this part. I looked at www.eibach.com but could not find
anything. Any picture will also help before I call the Eibach distributor
here in Paris.
Thanks in advance for your help.

Regards,
Frederic


_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list


---------------------------------
Do You Yahoo!?
Yahoo! Health - Feel better, live better