[s-cars] Brake Warning Light

[Kirby Smith]

As far as I know there are only two fluid levels (hydraulic and brake)
tested.  The other two functions are parking brake and hydraulic
pressure.  Be sure your brake fluid is up to the cup in the reservoir.
Be sure your hydraulic fluid is a bit overfilled.  Be sure the filter in
the hydraulic reservoir is clean.

A bad bomb will show up with a light if you deplete the pressure, but
otherwise won't impact the light condition.

Slow turn-off of the light after starting is due to the filter, or
filters in the high pressure hose and its bolts, or to a bad pump.  No
turn off could be fluid level, or parking brake switch.

kirby

DeepPurple wrote:
>
> I know that Audi does some different things when they put together a
> car and it really doesn't bother me.  However, I would like it if they
> would tell you.  Anyway to my question.
>
> I know that the brake fluid level and the power steering fluid level
> are tied into the Brake light on the dash, what I don't know is what
> other fluid level is tied in?  I have checked all the fluid levels and
> I keep getting the warning light.
>
> Any Ideas?
>
> Oh, BTW, the syncro problem that I was having with my transmission
> dissapeared.  Is that supposed to happen?
>
> I look forward to your advises.
>
> Fred
> 90 Lago Blue V8q
> 92 Black/Black UrS4
> Philadelphia, PA
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list