[s-cars] 2B Camber Plates

[James Murray (LMC)]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
Thanks Hap, I will contact 2Bennett and ask what improvement have been made to the design that reduces or "hopefully" elliminates this noisy drive.

I'll post the response.

Cheers, /James.

	-----Original Message-----
	From:	CaptMagu at aol.com [SMTP:CaptMagu at aol.com]
	Sent:	December 11, 2002 11:55 AM
	To:	James.Murray at ericsson.ca; pete3633 at bellsouth.net; neilsphoto at yahoo.com; s-car-list at audifans.com
	Subject:	Re: [s-cars] 2B Camber Plates

	Jamu

	I have had a set of the original 2Bennett solid spherical camber plates
	mounted on my car for over a year now. They are noisy. Would I replace them
	with stock or equivalent? No. The turn in is just too good. Did I mention
	that they were noisy? Couple these with the Big RSB and despite what
	naysayers say, pigs can fly!

	The new plates are supposed to address the noise problem. Did I mention that
	pigs can fly? The noise issue on the originals is primarily associated with
	low speed street irregularities(pot holes and such). There is no noise at
	highway speeds(at least that ears with30+ years of high intensity jet engine
	noise can hear).

	Hap, with sharp turns in Evergreen, Maguire