[s-cars] 2B Camber Plates

[James Murray (LMC)]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
I e-mailed 2Bennett and got the response below, so I gave them a ring just =
now and talked to Ken. He said the new plates are like totally different fr=
om the previous designs and you will hear no noise! He said the previous de=
signs had the spherical bearing welded in... and these ones are totally ser=
viceable. Apples and Oranges according to Ken. Hmmm... So what's the word o=
n the rubber top mount? Is it for noise reduction or alignment? Ken was men=
tioning it had to do with alignment. I would still be interested to hear an=
y lister results using the new design!

Cheers, /James.

P=2ES. No GP's, I asked :-(.

	-----Original Message-----
	From:	Audimotive at aol.com [SMTP:Audimotive at aol.com]
	Sent:	December 11, 2002 2:49 PM
	To:	James.Murray at ericsson.ca
	Subject:	Re: 2Bennett Camber Plates

	There is no noise related to this design. We have thoroughly tested and co=
ntinue to abuse these parts and have not had noise with the "Revolution" sy=
stem.
	Ken

	-----Original Message-----
	From:	James Murray (LMC)
	Sent:	December 11, 2002 11:59 AM
	To:	'CaptMagu at aol.com'; pete3633 at bellsouth.net; neilsphoto at yahoo.com; s-ca=
r-list at audifans.com
	Subject:	RE: [s-cars] 2B Camber Plates

	Thanks Hap, I will contact 2Bennett and ask what improvement have been mad=
e to the design that reduces or "hopefully" elliminates this noisy drive.

	I'll post the response.

	Cheers, /James.

		-----Original Message-----
		From:	CaptMagu at aol.com [SMTP:CaptMagu at aol.com]
		Sent:	December 11, 2002 11:55 AM
		To:	James.Murray at ericsson.ca; pete3633 at bellsouth.net; neilsphoto at yahoo.co=
m; s-car-list at audifans.com
		Subject:	Re: [s-cars] 2B Camber Plates

		Jamu

		I have had a set of the original 2Bennett solid spherical camber plates
		mounted on my car for over a year now. They are noisy. Would I replace th=
em
		with stock or equivalent? No. The turn in is just too good. Did I mention
		that they were noisy? Couple these with the Big RSB and despite what
		naysayers say, pigs can fly!

		The new plates are supposed to address the noise problem. Did I mention t=
hat
		pigs can fly? The noise issue on the originals is primarily associated wi=
th
		low speed street irregularities(pot holes and such). There is no noise at
		highway speeds(at least that ears with30+ years of high intensity jet eng=
ine
		noise can hear).

		Hap, with sharp turns in Evergreen, Maguire