[s-cars] 2B Camber Plates

[James Murray (LMC)]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
I didn't get a straight answer on that, I did ask but I don't think he unde=
rstood me correctly or I didn't understand Ken properly (more than likely m=
e=2E..). He seemed to indicated yes, but you have to have the right equipme=
nt to do it because it's tricky? Seems to me if you go for an alignment and=
 ask for both setups then mark the positions it should be possible to do? I=
 think a more knowledgeable expert like Igor would need to chime in on this=
 one.

/Jamu.

	-----Original Message-----
	From:	TM [SMTP:t44tq at mindspring.com]
	Sent:	December 11, 2002 5:42 PM
	To:	'James Murray (LMC)'; CaptMagu at aol.com; pete3633 at bellsouth.net; neilsp=
hoto at yahoo.com; 'Michael DeBlasio'; 'John Petersen'; s-car-list at audifans.com
	Subject:	RE: [s-cars] 2B Camber Plates

	So James-
	Any word on if the $500 2Bennett camber plates can adjust camber
	back to -0.5 deg. for my H&R lowered car and then go to -2.0 deg.
	for the track?

	If so, I'll be getting them next season.

	Taka

	-----Original Message-----
	From: s-car-list-admin at audifans.com
	[mailto:s-car-list-admin at audifans.com] On Behalf Of James Murray (LMC)
	Sent: Wednesday, December 11, 2002 4:55 PM
	To: 'CaptMagu at aol.com'; 'pete3633 at bellsouth.net';
	'neilsphoto at yahoo.com'; 'Michael DeBlasio'; 'John Petersen';
	's-car-list at audifans.com'
	Subject: RE: [s-cars] 2B Camber Plates


	This message is in MIME format. Since your mail reader does not
	understand this format, some or all of this message may not be legible.
	--
	[ Picked text/plain from multipart/alternative ]
	I e-mailed 2Bennett and got the response below, so I gave them a ring
	just now and talked to Ken. He said the new plates are like totally
	different from the previous designs and you will hear no noise! He said
	the previous designs had the spherical bearing welded in... and these
	ones are totally serviceable. Apples and Oranges according to Ken.
	Hmmm... So what's the word on the rubber top mount? Is it for noise
	reduction or alignment? Ken was mentioning it had to do with alignment.
	I would still be interested to hear any lister results using the new
	design!

	Cheers, /James.

	P.S. No GP's, I asked :-(.

		-----Original Message-----
		From:	Audimotive at aol.com [SMTP:Audimotive at aol.com]
		Sent:	December 11, 2002 2:49 PM
		To:	James.Murray at ericsson.ca
		Subject:	Re: 2Bennett Camber Plates

		There is no noise related to this design. We have thoroughly
	tested and continue to abuse these parts and have not had noise with the
	"Revolution" system.
		Ken

		-----Original Message-----
		From:	James Murray (LMC)
		Sent:	December 11, 2002 11:59 AM
		To:	'CaptMagu at aol.com'; pete3633 at bellsouth.net;
	neilsphoto at yahoo.com; s-car-list at audifans.com
		Subject:	RE: [s-cars] 2B Camber Plates

		Thanks Hap, I will contact 2Bennett and ask what improvement
	have been made to the design that reduces or "hopefully" elliminates
	this noisy drive.

		I'll post the response.

		Cheers, /James.

			-----Original Message-----
			From:	CaptMagu at aol.com [SMTP:CaptMagu at aol.com]
			Sent:	December 11, 2002 11:55 AM
			To:	James.Murray at ericsson.ca;
	pete3633 at bellsouth.net; neilsphoto at yahoo.com; s-car-list at audifans.com
			Subject:	Re: [s-cars] 2B Camber Plates

			Jamu

			I have had a set of the original 2Bennett solid
	spherical camber plates
			mounted on my car for over a year now. They are noisy.
	Would I replace them
			with stock or equivalent? No. The turn in is just too
	good. Did I mention
			that they were noisy? Couple these with the Big RSB and
	despite what
			naysayers say, pigs can fly!

			The new plates are supposed to address the noise
	problem. Did I mention that
			pigs can fly? The noise issue on the originals is
	primarily associated with
			low speed street irregularities(pot holes and such).
	There is no noise at
			highway speeds(at least that ears with30+ years of high
	intensity jet engine
			noise can hear).

			Hap, with sharp turns in Evergreen, Maguire
	_______________________________________________
	S-CAR-List mailing list
	S-CAR-List at audifans.com
	http://www.audifans.com/mailman/listinfo/s-car-list