[s-cars] Tacho fix?

[Andrew.Jackson at bmo.com]

Bob,

Thanks for the info, but I'm hoping that there's another way.

My CC unit is different from the units used in the 12v V6 and URS's and
does not have that output.  :-(
Another suggestion?

ALJ






"Bob Rossato" <bob.rossato at att.net>
Sent by: s-car-list-admin at audifans.com
12/12/2002 07:20 AM


        To:     <maxin-and-relaxin at rogers.com>, <s-car-list at audifans.com>
        cc:
        Subject:        RE: [s-cars] Tacho fix?


There is no potentiometer on our boards, at least not on the S6 boards
I've
looked at, and just double checked.  The problem is with use of the wrong
circuit board.  I'm speculating that the handful of us that have the low
tach reading have a car that at some point had warranty work done on the
IC
and the replacement supplied by Audi used the wrong circuit board, 6cyl vs
5cyl.  Just a guess.  Don't know how it relates to your Coupe IC.

As for how you would check RPM on our direct ignition systems, the answer
has coincidently enough been the subject of much discussion over the last
couple of days.  Use channel 28 (17?) of the Climate Control OBD.  The
output from the OBD system reads accurately on mine, whereas my tach is
about 15-20% lower.

Bob


> -----Original Message-----
> From: s-car-list-admin at audifans.com
> [mailto:s-car-list-admin at audifans.com]On Behalf Of Andrew Lee Jackson
> Sent: Wednesday, December 11, 2002 11:56 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] Tacho fix?
>
>
>
> Not sure how relevant this is for the UrS's or my Cq, but it sounds like
> it may be worth investigating for those of us with the inaccurate tachs.
>
> http://www.audi-quattro.org/~cuatrokoop/tachcal.htm
>
>
> A question:
>
> With our direct ignition motors, what is the best way to go about
> fetching the true RPM value?
>
>
>
>
> ALJ


_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list