[s-cars] 2B Camber Plates

[CLAG500 at aol.com]

Bruce,

  If you want to get the camber and toe close to a good street setup without
much work just take a piece of string and tie it to the back wheel on one
side. Loosen the camber adjustment bolts on the front strut on that side,
pull the string tightly across the front wheel, pull the top of the wheel out
until you have some toe in. (rear of wheel is touching the string. Front of
wheel is not) should have 1/8 inch or so. It's not super accurate because the
rear track is narrower but it should get you very close. Then just repeat on
the other side. This made my car track much better.

Chad Tobin