[s-cars] Superchips chip for urS6

[Igor Kessel]

FvAMI at aol.com wrote:
>
> > MTM
>
> MTM K24 3.0 bar runs lean during cruise and pings if you only have the Bosch
> 3.0 bar sensor (The variable 4 bar Map sensor (VMAP4) is recommended) with 91
> octane. Superchips are fine they have decent torque but missing top end power
> and are a bit mild. I sent them back (1996 version). That was in 1996.
>
> Best regards,
> Feico van der Laan

Feico,
can you elaborate on this variable 4 bar Map sensor (VMAP4)? is it
scaled the same way as the Bosch 3.0 bar? If yes, then volts/pound value
should be different, thus it would throw the map off, no?

--
Igor Kessel
two turbo quattros