[s-cars] Dust sleeve removal?

Peter tectonic1 at mac.com
Wed Jul 3 11:03:24 EDT 2002


Dave,

If we are talking about the accordian like rubber boot at the frontstruts, I
have Bilsteins AND the stock boots.  I can send a pic if need be.

Peter Anderson
'93 S4

On 7/3/02 8:53 AM, "Freed, David (Exchange)" <dfreed at bear.com> wrote:

> This message is in MIME format. Since your mail reader does not understand
> this format, some or all of this message may not be legible.
> --
> --
> [ Picked text/plain from multipart/alternative ]
> Forget mounting the dust boots on Bilsteins.  First, the shaft is MUCH
> thicker than stock, so OEM boots won't fit.  Second, the design of Bilsteins
> is basically an upside down shock so the real shaft is already sealed inside
> the shock body.  No boot needed or available.  I even contacted Bilstein and
> they said there was no boots available from them that would fit.  They also
> said, because of the thickness of the "shaft" the only boots that would fit,
> would end up hitting the springs and self destructing in a short period of
> time.  Bottom line, there are no boots needed or available for Bilsteins.
> Koni and Boge do require boots.
>
>
>
> Dave Freed  '93 S4, '91 200 TQA
>
>
>
> -----Original Message-----
>
> From: Fred Munro <munrof at sympatico.ca>
>
> To: 'Aaron' <aaront at cox-internet.com>,
>
>     Bob Rossato <bob.rossato at att.net>
>
> Cc: "Jacobson, Steven F (Steve)" <stevejacobson at avaya.com>,
>
>     "s-car-list at audifans.com" <s-car-list at audifans.com>
>
> Subject: RE: [s-cars] Dust sleeve removal?
>
> Date: Tue, 2 Jul 2002 20:40:10 -0400
>
>
>
> I'd install the dust boots if you can, Aaron. I got the same story from the
> dealer years ago when they forgot to replace the boot on a front shock on my
> '86 5ktq. They said it wasn't needed, couldn't be done without stripping the
> strut, yada, yada,yada. Having the shaft run up and down in a load of sand
> didn't seem to be a good way of ensuring the longevity of shaft or seal, so
> I installed the boot myself, with the strut in the car. Will the stock boots
> fit onto the Bilsteins?
>
>
>
> Fred Munro
>
> '94 S4
>
>
>
> -----Original Message-----
>
> From: Aaron [SMTP:aaront at cox-internet.com]
>
> Sent: Tuesday, July 02, 2002 12:13 PM
>
> To:   Bob Rossato
>
> Cc:   Jacobson, Steven F (Steve); s-car-list at audifans.com
>
> Subject:    Re: [s-cars] Dust sleeve removal?
>
>
>
> --
>
> [ Picked text/plain from multipart/alternative ]
>
> I had my local tire shop install my Bilsteins and they left the boots off.
> They said they are not really needed as the shock shafts are plated etc
> etc... I think this is bull but they are offering a lifetime warrantee on
> the shocks so?.... I'm wondering if I should install some new boots
> regardless - It would be nice for the next owner who wont have the
> warrantee. Any thoughts? Thanks Aaron
>
>
>
>
>
> --
>
> --
> **********************************************************************
> Please be aware that, notwithstanding the fact that the person sending
> this communication has an address in Bear Stearns' e-mail system, this
> person is not an employee, agent or representative of Bear Stearns.
> Accordingly, this person has no power or authority to represent, make
> any recommendation, solicitation, offer or statements or disclose
> information on behalf of or in any way bind Bear Stearns or any of its
> affiliates.
> **********************************************************************
> --
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list




More information about the S-car-list mailing list