[s-cars] Picture of MTM wastgate instruction

[Cody Payne]

Thanks Ed,
	That really did help the low-end torque on my car.  I can still hear the wastegate open so I know it is not too tight.

Pretty easy mod ;-)

cp

-----Original Message-----
From: Ed Walsh [mailto:rundeep_32 at yahoo.com]
Sent: Thursday, July 18, 2002 5:02 PM
To: Cody Payne
Cc: s-car-list at audifans.com
Subject: RE: [s-cars] Picture of MTM wastgate instruction


Cody,

I removed the freeze plug by drilling a 1/8th inch
hole through the center of it.  Then I screwed a,
well, screw into the hole (only a couple turns of the
screw).  Finally, I grabbed the screw with a pair of
pliers and twisted the plug off.  It is super easy!

Ed


--- Cody Payne <Cody.Payne at bconnected.com> wrote:
> Ed,
>    Stupid question but how do you get the freeze
> plug off?  You are speaking of the "metal" plug that
> is directly on top of the wastegate right?
>
> Thx
>
> cp
>
> 	-----Original Message-----
> 	From: Ed Walsh [mailto:rundeep_32 at yahoo.com]
> 	Sent: Thu 7/18/2002 4:23 PM
> 	To: s-car-list at audifans.com
> 	Cc:
> 	Subject: [s-cars] Picture of MTM wastgate
> instruction
>
>
>
> 	Sorry that they are blury (I can't figure out the
> 	"macro" option on the camera)
>
> 	http://photos.yahoo.com/rundeep_32
>
> 	The wastegate instructions read:
>
> 	"Remove freeze plug from top of wastegate and with
> 	allen key (5.5 or 6mm, btw) turn the tensioner
> screw
> 	in 6 complete revolutions.  The screw is loctited
> in
> 	place and may need to be heated"
>
> 	HTH, Ed
>
> 	__________________________________________________
> 	Do You Yahoo!?
> 	Yahoo! Autos - Get free new car price quotes
> 	http://autos.yahoo.com
> 	_______________________________________________
> 	S-CAR-List mailing list
> 	S-CAR-List at audifans.com
> 	http://www.audifans.com/mailman/listinfo/s-car-list
>
>
>


__________________________________________________
Do You Yahoo!?
Yahoo! Autos - Get free new car price quotes
http://autos.yahoo.com