[s-cars] RS4 Clutches

[Jim Bonnet]

Robin St.Clair wrote:
> --
> [ Picked text/plain from multipart/alternative ]
>
> Guys
>
> I have carried out some research into the entire clutch issue. As a result, I have access to modified Sachs Clutches and single mass flywheels which are good for over 600bhp and 650 NM. These can be fitted to the RS6, RS4, S8, RS2, S4 old and new. The clutch has to be modified if you switch to a single mass flywheel. For the track types, there is a sintered Sachs clutch which is not recommended for road use.
>
> Without getting specific on prices (exchange rate volatility and volume) , they are comparable to RS4 prices. If you just want RS4 clutches then contact Josh Decker at Achtuning, (josh at achtuning.com), he supplies these parts on a wide basis.
>
> HTH
>
> R+C

Sorry.. Not to be dense the rs4 clutch will bolt right into the urs4?
thx-
Jim


--
quattro... the unfair advantage...