[s-cars] Fwd: RS2 brackets

Igor Kessel igor at s-cars.org
Mon Jul 29 15:54:01 EDT 2002


They do in my car. I know nothing about the 314mm rotors.
The 323mm rotor clears the 993tt (or, in my case, the black 928gts)
calipers RADIALLY just fine. In order to centre the rotor AXIALLY in the
caliper pads' slot I had shaved 50 mils off the RS2 brackets per Frank's
old recommendation. Although they would've fit w/o this procedure, but a
perfectionist inside me took over.

Igor


Paul Friedenberg wrote:
>
> Really? Now I'm confused! Is the offset (hat) different for the 323 and 314
> rotors? With the 314mm rotors, they were centered perfectly, but the caliper
> needed to come away from the rotor a bit. How is it that they fit over the
> larger diameter rotors without spacers??
>
> >From: Igor Kessel <igor at s-cars.org>
> >To: Paul Friedenberg <paulunm at msn.com>
> >CC: audisport8 at aol.com, s-car-list at audifans.com
> >Subject: Re: [s-cars] Fwd: RS2 brackets
> >Date: Mon, 29 Jul 2002 13:52:11 -0400
> >
> >Au contraire. He needs to _shave_ ~1.25mm (~50 mils) off the RS2
> >brackets, where thay mate to the hub, in order to centre the pads in the
> >993tt calipers.
> >
> >Igor
> >'97 S6
> >993tt+RS2+S8+Mintex Red+SS lines (BBB - Budget Big Blacks)
> >
> >Paul Friedenberg wrote:
> > >
> > > Guys,
> > > I recently sold my RS2 brackets, which with spacers fit 993 calipers and
> > > 314x30 rotors (euro A8??) Matt has the same calipers with 323x30 S8
> >rotors.
> > > I am giong to say that this setup will not work, any comments? Read
> >below
> > > email for more info...
> > >
> > > >From: Audisport8 at aol.com
> > > >To: paulunm at msn.com
> > > >Subject: RS2 brackets
> > > >Date: Sun, 28 Jul 2002 22:35:29 EDT
> > > >
> > > >Paul-
> > > >        Well, I'm all ready to do my 993tt brake conversion except for
> > > >S/S lines and super blue fluid.....Last question I promise!  Where are
> >the
> > > >spacers you
> > > >had made supposed to go?  In between the RS2 bracket and the caliper or
> > > >between the head of the bolt and the RS2 bracket?
> > > >
> > > >I have the 993tt calipers which are part # 993 351 425 10 and 2000 Audi
> >S8
> > > >rotors 323x30 with your RS2 brackets.
> > > >With this in mind, do I even need the spacers?
> > > >TIA.......sorry to be such a PITA ; )
> > > >
> > > >Matt
> > >
> > > _________________________________________________________________
> > > Send and receive Hotmail on your mobile device: http://mobile.msn.com
> > >
> > > _______________________________________________
> > > S-CAR-List mailing list
> > > S-CAR-List at audifans.com
> > > http://www.audifans.com/mailman/listinfo/s-car-list
> >_______________________________________________
> >S-CAR-List mailing list
> >S-CAR-List at audifans.com
> >http://www.audifans.com/mailman/listinfo/s-car-list
>
> _________________________________________________________________
> Join the world▓s largest e-mail service with MSN Hotmail.
> http://www.hotmail.com



More information about the S-car-list mailing list